Jump to content

Welcome, Guest!

rolfharald

Members
  • Content Count

    1
  • Joined

  • Last visited

Community Reputation

0 Neutral

About rolfharald

  • Rank
    Newbie

Profile Information

  • Gender
    Not Telling
  • Location
    Srpsborg
  1. I have tried to interface OBDII equipment with the baudrate 10400 using procedures described in different network places, but without any success. In /boot/cmdline.txt dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait In /etc/inittab #Spawn a getty on Raspberry Pi serial line #T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100 In /boot/config.txt init_uart_clock=1625000 init_uart_baud=19200 However, the baudrate becomes 19200, and not 10400 as requested. I also need to apply a baudrate of 5 for the initialization messeges. Is this possible, and then I have to change it to 10400? Thank you for any answers. Rolf Harald Haugen

About Us

Bringing you the latest Raspberry Pi news, tutorials and user forum.

The Fruity Computer

×
×
  • Create New...